|
|
SPECIFICATION PREFIX
|
DESCRIPTION
|
|
AGS-44071
|
PHOSPHATE ESTER RESISTANT
|
|
AMS3200
|
PETROLEUM BASE HYDRAULIC OIL
|
|
AMS3201
|
N/A
|
|
AMS3205
|
LOW TEMPERATURE
|
|
AMS3208
|
WEATHER
|
|
AMS3209
|
FOR ELECTRICAL USE NEOPRENE. WEATHER RESISTANT
|
|
AMS3212
|
AROMATIC FUEL
|
|
AMS3213
|
AROMATIC FUEL
|
|
AMS3214
|
AROMATIC FUEL
|
|
AMS3215
|
AROMATIC FUEL
|
|
AMS3220
|
HOT OIL AND FUEL
|
|
AMS3222
|
HOT OIL, HIGH SWELL
|
|
AMS3226
|
HOT OIL AND COOLANT
|
|
AMS3227
|
OIL AND COOLANT
|
|
AMS3228
|
OIL AND COOLANT
|
|
AMS3229
|
HOT OIL
|
|
AMS3238
|
NA
|
|
AMS3240
|
WEATHER
|
|
AMS3241
|
WEATHER
|
|
AMS3242
|
WEATHER
|
|
AMS3242
|
WEATHER RESISTANT AND MOST REFRIGERANTS
|
|
AMS3248
|
HIGH STRENGTH EP
|
|
AMS3249
|
HYDRAZINE RESISTANT
|
|
AMS3301
|
GENERAL PURPOSE SILICONE
|
|
AMS3302
|
GENERAL PURPOSE SILICONE
|
|
AMS3303
|
GENERAL PURPOSE SILICONE
|
|
AMS3304
|
WAVEGUIDE FLANGES SILICONE
|
|
AMS3304
|
SILICONE. NOT RECOMMENDED FOR HIGH-PRESSURE DYNAMIC APPLICATIONS.
|
|
AMS3304
|
AEROSPACE SILICONE
|
|
AMS3305
|
GENERAL PURPOSE SILICONE
|
|
AMS3307
|
SILICONE (LOW SET, NON OIL-RESISTANT)
|
|
AMS3325
|
SILICONE (FUEL AND OIL)
|
|
AMS3326
|
SILICONE (FUEL AND OIL-RESISTANTI
|
|
AMS3327
|
SILICONE (FUEL AND OIL-RESISTANT)
|
|
AMS3334
|
SILICONE (LOW TEMPERATURE)
|
|
AMS3335
|
SILICONE (EXTREME LOW TEMP)
|
|
AMS3336
|
SILICONE (EXTREME LOW TEMP)
|
|
AMS3337
|
SILICONE (EXTREME LOW TEMP)
|
|
AMS3338
|
SILICONE (EXTREME LOW TEMP)
|
|
AMS3345
|
SILICONE
|
|
AMS3346
|
SILICONE
|
|
AMS3347
|
SILICONE (HIGH STRENGTH)
|
|
AMS3349
|
SILICONE
|
|
AMS3356
|
SILICONE (ELECTRICAL GRADE)
|
|
AMS3357
|
LUBRICATING OIL & COMPRESSION SET RESISTANT. HIGH TEMPERATURE
|
|
AMS3668
|
TEFLON
|
|
AMS7266
|
HOT OIL AND FUEL
|
|
AMS7267
|
SILICONE O-RINGS FOR SEALING AT TEMPERATURES FROM -85° TO +500°F. THIS DRAWING COVERS TUBE-FITTING SIZES ONLY.
|
|
AMS7267
|
THIS DRAWING COVERS ALL SIZES EXCEPT THE TUBE FITTING SIZES. DRY HEAT (LOW SET)
|
|
AMS7268
|
SILICONE. HIGH TEMPERATURE & LOW COMPRESSION SET
|
|
AMS7270
|
FOR USE IN AIRCRAFT FUELS, BOTH PISTON ENGINE (GASOLINE) AND JET (JET FUELS).
|
|
AMS7270
|
O-RINGS USED FOR AIRCRAFT FUELS @ -65° TO 250° F.
|
|
AMS7271
|
THIS DRAWING COVERS ALL SIZES EXCEPT THE TUBE FITTING SIZES.
|
|
AMS7271
|
AEROSPACE NITRILE. FUEL (LOW TEMPERATURE)
|
|
AMS7271
|
O-RINGS USED IN AIRCRAFT FUELS @ -65° TO 212°, AS REQUIRED. BOSS GASKETS.
|
|
AMS7272
|
O-RINGS USED FOR AIRCRAFT LUBRICATING OILS.
|
|
AMS7273
|
HOT FUEL & OIL
|
|
AMS7273
|
O-RINGS USED IN AIRCRAFT FUEL SYSTEMS FROM -67° TO + 347°F AND AIRCRAFT LUBRICATING OILS @ -67° TO +302"F. MATERIAL IS BLUE IN COLOR.
|
|
AMS7274
|
O-RINGS USED FOR AIRCRAFT LUBRICATING OILS @ -40° TO 300°F.
|
|
AMS7276
|
HIGH TEMP. FLUID, VERY LOW COMPRESSION SET, ENGINE AND PROPELLER SERVICE. HIGH TEMPERATURE, VERY LOW SET
|
|
AMS7276
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT O-RINGS.
|
|
AMS7277
|
PHOSPHATE ESTER RESISTANT
|
|
AMS7278
|
THIS DRAWING COVERS ALL SIZES EXCEPT THE TUBE FITTING SIZES.
|
|
AMS7278
|
O-RINGS FOR USE IN AIRCRAFT LUBRICATING OILS AND HYDRAULIC FLUIDS AT TEMPERATURES UP TO 500° F.
|
|
AMS7278
|
O-RINGS, HIGH TEMPERATURE FLUID RESISTANT, FOR AIRCRAFT LUBRICATING OILS AND HYDRAULIC FLUIDS AT TEMPERATURES UP TO 500°F.
|
|
AMS7279
|
FLUOROCARBON (HIGH TEMP)
|
|
AMS7280
|
ENGINE AND PROPELLER SERVICE. FLUOROCARBON (HIGH TEMP)
|
|
AMS7280
|
USE WITH INTERNAL STRAIGHT THREAD FLUID CONNECTION BOSSES.
|
|
AMS7620
|
FUEL (LOW TEMPERATURE)
|
|
AMS-R-6855
|
FUEL & PETROLEUM OIL RESISTANT
|
|
AN123851 THRU AN123950
|
O-RINGS USED FOR AIRCRAFT LUBRICATING OILS @ -40° TO 300°F.
|
|
AN123951 THRU AN124050
|
FOR USE IN AIRCRAFT FUELS, BOTH PISTON ENGINE (GASOLINE) AND JET (JET FUELS).
|
|
AN6225
|
V-RINGS
|
|
AN6226
|
U-CUPS
|
|
AN6227
|
COMMONLY CALLED "'RED OIL" IN THE AIRCRAFT INDUSTRY. HYDRAULIC FLUID PER MIL-H-5606 PETROLEUM BASED HYDRALIC FLUID USED IN MILIATRY AIRCRAFT
|
|
AN6228
|
ADAPTER V-RING FEMALE HYDRAULIC PACKING
|
|
AN6229
|
ADAPTER V-RING MALE HYDRAULIC PACKING
|
|
AN6230
|
COMMONLY CALLED "'RED OIL" IN THE AIRCRAFT INDUSTRY. HYDRAULIC FLUID PER MIL-H-5606 PETROLEUM BASED HYDRALIC FLUID USED IN MILIATRY AIRCRAFT
|
|
AN6231
|
DRAWING IS "INACTIVE FOR NEW DESIGN" AND REPLACED BY MS-28778
|
|
AN6244
|
BACKUP RING
|
|
AN6246
|
USE MS35803
|
|
AN6290
|
BOSS GASKETS FOR USE WITH MIL-H-5606 TYPE HYDRAULIC OILS IN TYPE 1 SYSTEMS @ -65° TO 160°F
|
|
AN6291
|
BACKUP RING
|
|
AN930
|
GROMMET
|
|
AN-R-22
|
BACKUP RING
|
|
AN-R-22
|
BACKUP RING
|
|
AS17413
|
O-RINGS FOR USE IN AIRCRAFT LUBRICATING OILS AND HYDRAULIC FLUIDS AT TEMPERATURES UP TO 500° F.
|
|
AS3084
|
ENGINE AND PROPELLER SERVICE. FLUOROCARBON (HIGH TEMP)
|
|
AS3085
|
ENGINE AND PROPELLER SERVICE
|
|
AS3209
|
HIGH TEMP. FLUID, VERY LOW COMPRESSION SET, ENGINE AND PROPELLER SERVICE. HIGH TEMPERATURE, VERY LOW SET
|
|
AS3569
|
O-RINGS USED FOR AIRCRAFT FUELS @ -65° TO 250° F.
|
|
AS3570
|
O-RINGS USED FOR AIRCRAFT LUBRICATING OILS @ -40° TO 300°F.
|
|
AS3578
|
AEROSPACE NITRILE. FUEL (LOW TEMPERATURE)
|
|
AS3582
|
AEROSPACE SILICONE
|
|
BUTYL
|
PHOSPHATE ESTER RESISTANT
|
|
BUTYL
|
PHOSPHATE ESTER RESISTANT
|
|
Design Standard
|
GENERAL SIZE STANDARD FOR BOSS FITTINGS.
|
|
Design Standard
|
GENERAL SIZE STANDARD FOR BOSS FITTINGS.
|
|
M25988/1
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
M25988/2
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
M25988/3
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
M25988/4
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
M83248/1
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT O-RINGS.
|
|
M83248/2
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT O-RINGS.
|
|
M83461/1
|
USED IN MIL-H-5606 FLUID, AIRCRAFT HYDRAULIC FLUID.
|
|
MIL-G-1149, TYPE II, CLASS 1
|
WEATHER RESISTANT AND MOST REFRIGERANTS
|
|
MIL-G-1149, TYPE II, CLASS 3
|
PHOSPHATE ESTER RESISTANT
|
|
MIL-P-18017
|
USE MS28775
|
|
MIL-P-24074, TYPE 1, GRADE A
|
VIRGIN UNFILLED TEFLON
|
|
MIL-P-25732
|
O-RINGS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS, TYPE II SYSTEMS @ -65° TO 275°F.
|
|
MIL-P-5315
|
O-RINGS FOR USE IN AIRCRAFT FUEL SYSTEMS WITH JET FUELS @ -65° TO 200°F BOSS GASKETS.
|
|
MIL-P-5315
|
O-RINGS FOR USE IN AIRCRAFT FUEL SYSTEMS WITH JET FUELS @ -65° TO 200° F
|
|
MIL-P-5510
|
DRAWING IS "INACTIVE FOR NEW DESIGN" AND REPLACED BY MS-28778
|
|
MIL-P-5510
|
BOSS GASKETS FOR USE WITH MIL-H-5606 TYPE HYDRAULIC OILS IN TYPE 1 SYSTEMS @ -65° TO 160°F
|
|
MIL-P-5510
|
BOSS GASKETS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS IN TYPE I SYSTEMS @ -65° TO 250° F
|
|
MIL-P-5510
|
BOSS GASKETS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS IN TYPE I SYSTEMS @ -65° TO 250°F.
|
|
MIL-P-5516 Class B
|
V-RINGS
|
|
MIL-P-5516 Class B
|
U-CUPS
|
|
MIL-P-5516 Class B
|
COMMONLY CALLED "'RED OIL" IN THE AIRCRAFT INDUSTRY. HYDRAULIC FLUID PER MIL-H-5606 PETROLEUM BASED HYDRALIC FLUID USED IN MILIATRY AIRCRAFT
|
|
MIL-P-5516 Class B
|
COMMONLY CALLED "'RED OIL" IN THE AIRCRAFT INDUSTRY. HYDRAULIC FLUID PER MIL-H-5606 PETROLEUM BASED HYDRALIC FLUID USED IN MILIATRY AIRCRAFT
|
|
MIL-P-5516 Class B
|
O-RINGS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS IN TYPE I SYSTEMS @ -65° TO 225 °F.
|
|
MIL-P-83461
|
USED IN MIL-H-5606 FLUID, AIRCRAFT HYDRAULIC FLUID.
|
|
MIL-R-25988, Class 1 Grade 60
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
MIL-R-25988, Class 1 Grade 70
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
MIL-R-25988, Class 1 Grade 80
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
MIL-R-25988, Class 3 Grade 75
|
OIL & FUEL RESISTANT. BLUE COLOR AS REQUIRED BY MIL SPEC. FOR LOW-PRESSURE APPLICATIONS.
|
|
MIL-R-6855, CLASS 1, GRADE 60
|
FUEL & PETROLEUM OIL RESISTANT
|
|
MIL-R-7362, Type I
|
FOR MIL-L-7808 FLUIDS. THIS DRAWING COVERS ALL SIZES EXCEPT THE TUBE FITTING SIZES.
|
|
MIL-R-83248, 75 Shore A
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
|
|
MIL-R-83248, 90 Shore A
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
|
|
MIL-R-83248, Type 1 Class 1
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT O-RINGS.
|
|
MIL-R-83248, Type 1 Class 2
|
FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID AND COMPRESSION SET RESISTANT O-RINGS.
|
|
MIL-R-8791
|
TEFLON BACKUP SINGLE TURN
|
|
MIL-R-8791
|
TEFLON RING
|
|
MIL-R-8913
|
WIPER
|
|
MIL-S-5049
|
METAL
|
|
MIL-W-5521
|
LEATHER
|
|
MS122026 THRU MS122075
|
WASHER - LOCK, SPRING
|
|
MS122076 THRU MS122115
|
INSERT CRES HELICAL COIL COARSE THREAD 1 DIA. NOMINAL LENGTH
|
|
MS122236 THRU MS122275
|
INSERT-CRES HELICAL COIL COARSE THREAD, 3 DIA NOMINAL LENGTH (ASG)
|
|
MS122900 THRU MS122939
|
CLAMP LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE
|
|
MS124691 THRU MS124730
|
INSERT, CRES HELICAL COIL FINE THREAD, 1-1/2 DIA NOMINAL LENGTH
|
|
MS124771 THRU MS124810
|
INSERT - CRES HELICAL COIL FINE THREAD, 2 1/2 DIA NOMINAL LENGTH
|
|
MS124811 THRU MS124850
|
INSERT, CRES HELICAL COIL FINE THREAD, 3 DIA NOMINAL LENGTH
|
|
MS14004
|
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR SHELL SIZE 6
|
|
MS14101
|
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED
|
|
MS14144
|
NUT, SELF-LOCKING, LIGHTWEIGHT, CASTELLATED, 450 DEG. F
|
|
MS14145
|
NUT, SELF-LOCKING, LIGHTWEIGHT, THIN, CASTELLATED, 450 DEG. F
|
|
MS14146
|
NUT, SELF-LOCKING, CASTELLATED, HEXAGON, C'BORED, CAPTIVE WASHER, 450 DEG.
|
|
MS14151
|
WASHER, FLAT, ROUND, CORROSION RESISTING STEEL (FOR ELECTRICAL APPLICATIONS
|
|
MS14156
|
NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 180 KSI FTU, 450 DEG. F, SPLINE D
|
|
MS14157
|
BOLT, WHEEL, TENSION, FLANGED STEEL, 180KSI FTU, 450 DEG. F EXTERNAL SPLINE
|
|
MS14164
|
NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 220 KSI FTU, 450 DEG. F SPLINE, D
|
|
MS14179
|
NUT, PLATE, SELF-LOCKING, FLOATING, TWO LUG, REDUCED RIVET SPACING, STEEL,
|
|
MS14181
|
BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU, EXTERNAL WRENCHING, SPLINE DR
|
|
MS14182
|
NUT, SELF-LOCKING, EXTENDED WASHER, ROUND, NICKEL ALLOY 718, 220 KSI FTU, 4
|
|
MS14183
|
WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUD
|
|
MS14200
|
NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.) 450 DEG. F
|
|
MS14210
|
NUT,FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A. R. E), 450 DEG.
|
|
MS14219
|
RIVET, SOLID, 120 DEG. FLUSH INTERFERENCE, TENSION TYPE HEAD
|
|
MS14222
|
NUT, SELF-LOCKING, 450 DEG. F, HEXAGON, REDUCED HEAD HEIGHT, RING BASE, COR
|
|
MS15535
|
LAMPS, INCANDESCENT, SEALED BEAM, PAR-56, SCREW TERMINAL BASE
|
|
MS15795
|
WASHER, FLAT METAL, ROUND, GENERAL PURPOSE (IN./MM)
|
|
MS15983
|
NUT, PLAIN, PLATE, NON-COUNTERSUNK
|
|
MS16069
|
HARNESS, AIRCRAFT SAFETY, PILOT'S SHOULDER Y TYPE
|
|
MS16070
|
BELT, AIRCRAFT SAFETY, CREWMAN'S
|
|
MS16142
|
BOSS, GASKET SEAL STRAIGHT THREAD TUBE FITTING, STANDARD DIMENSIONS FOR
|
|
MS16198
|
SCREWS, WOOD, SLOTTED ROUND HEAD, AUSTENITIC CORROSION RESISTING STEEL, NON
|
|
MS16203
|
NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC
|
|
MS16205
|
BOLTS, MACHINE, REGULAR SEMI-FINISHED HEXAGON HEAD, COPPER-SILICON ALLOY (S
|
|
MS16206
|
BOLTS, MACHINE, HEXAGON HEAD, REGULAR SEMI-FINISHED, ALUMINUM ALLOY, UNC-2A
|
|
MS16208
|
BOLTS, MACHINE, HEXAGON HEAD, SEMIFINISHED CORROSION RESISTING STEEL UNC-2A
|
|
MS16213
|
WASHER, LOCK, FLAT, EXTERNAL TOOTH, NONMAGNETIC
|
|
MS16217
|
SCREWS, WOOD, SLOTTED FLAT HEAD, 82 DEGREE, AUSTENITIC, CORROSION-RESISTING
|
|
MS16228
|
NUT, SELF-LOCKING, HEXAGON-THIN, UNC 3B (NON METALLIC INSERT) AUSTENITIC CO
|
|
MS16535
|
RIVET - TUBULAR, OVAL HEAD
|
|
MS16536
|
RIVET - TUBULAR, 150 DEG. FLAT COUNTERSUNK HEAD
|
|
MS16555
|
PIN, STRAIGHT, HEADLESS (DOWEL) (.0002 OVER NOMINAL SIZE)
|
|
MS16624
|
RING, RETAINING, EXTERNAL, BASIC (TAPERED SECTION TYPE)
|
|
MS16625
|
RING, RETAINING, INTERNAL, BASIC (TAPERED SECTION TYPE)
|
|
MS16626
|
RING, RETAINING, EXTERNAL, INVERTED (TAPERED SECTION TYPE)
|
|
MS16627
|
RING, RETAINING, INTERNAL, INVERTED (TAPERED SECTION TYPE)
|
|
MS16628
|
RING, RETAINING, EXTERNAL, BOWED (TAPERED SECTION TYPE)
|
|
MS16629
|
RING, RETAINING, INTERNAL, BOWED (TAPERED SECTION TYPE)
|
|
MS16630
|
RING, RETAINING, EXTERNAL, BEVELED (TAPERED SECTION TYPE)
|
|
MS16631
|
RING, RETAINING, INTERNAL, BEVELED (TAPERED SECTION TYPE)
|
|
MS16632
|
RING, RETAINING, EXTERNAL, CRESCENT (REDUCED SECTION TYPE)
|
|
MS16633
|
RING, RETAINING, EXTERNAL, "E" (REDUCED SECTION TYPE)
|
|
MS16634
|
RING, RETAINING, EXTERNAL, BOWED "E" (REDUCED SECTION TYPE)
|
|
MS16994
|
NUT, PLAIN, KNURLED
|
|
MS16997
|
SCREW, CAP, SOCKET HEAD AND SCREW, CAP, SOCKET HEAD, SELF-LOCKING, ALLOY ST
|
|
MS16998
|
SCREW, CAP, SOCKET HEAD AND SCREW, CAP, SOCKET HEAD, SELF-LOCKING: ALLOY S
|
|
MS17131
|
BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER R
|
|
MS171401THRUMS171900
|
PIN - SPRING, CORROSION RESISTANT STEEL
|
|
MS17172
|
TERMINAL, STUD THREADED DOUBLE TURRET
|
|
MS172201THRUMS172235
|
WASHER, KEY - SINGLE, BEARING RETAINING, AMS 8350 (ASG)
|
|
MS172236THRUMS172270
|
NUT, SPANNER, BEARING RETAINING, AERONAUTICAL (ASG)
|
|
MS172271THRUMS172320
|
WASHER, KEY - SINGLE, AMS 6350 (ASG)
|
|
MS172321THRUMS172370
|
NUT - SPANNER, AERONAUTICAL
|
|
MS17245
|
LIGHT, COCKPIT, UTILITY
|
|
MS17246
|
MOUNTING BASE, COCKPIT UTILITY
|
|
MS17320
|
MOUNTING DEVICES FOR AIRCRAFT ELECTRIC EQUIPMENT, QUICK-ATTACH-DETACH, CIRC
|
|
MS17346
|
CONNECTOR, RECEPTACLE, ELECTRICAL BOX MOUNTING
|
|
MS17825
|
NUT, SELF-LOCKING, CASTELLATED, HEXAGON, 250 DEG. F NON-METALLIC INSERT
|
|
MS17826
|
NUT, SELF-LOCKING, CASTELLATED, HEXAGON 250 DEG. F, THIN NON-METALLIC INSER
|
|
MS17828
|
NUT, SELF-LOCKING, HEXAGON, REGULAR-HEIGHT, (NON-METALLIC INSERT) 250 DEG.
|
|
MS17829
|
NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F., (NON METALLIC INSE
|
|
MS17830
|
NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEG. F, AND 450 DEG. F (NON-METALLI
|
|
MS17845
|
SHIELD FOR USE WITH MS90362 EXTERNAL POWER RECEPTACLES
|
|
MS17983
|
COMPASS - MAGNETIC, PILOTS STANDBY
|
|
MS17987
|
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, RING H
|
|
MS17988
|
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, "T" HA
|
|
MS17989
|
PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, "L" HA
|
|
MS18013
|
INDICATOR, HUMIDITY, PLUG, COLOR CHANGE
|
|
MS18029
|
COVER ASSEMBLY, ELECTRICAL, FOR MS 27212 TERMINAL BOARD ASSEMBLY
|
|
MS18116
|
BOLT, STUD, AND SOCKET CAP HEAD SCREW, NICKEL-COPPER-ALUMINUM ALLOY
|
|
MS18156
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18157
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18158
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18159
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18160
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18161
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18162
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18163
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18164
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18165
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18166
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18167
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18168
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, POLARIZED CENTER SCREWLOCK, ELEC
|
|
MS18173
|
WASHER, FLAT
|
|
MS18174
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 14 (SIZE 16, 20 CRIM
|
|
MS18176
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 20 (SIZE 16, 20 CRIM
|
|
MS18181
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 42 (SIZE 16 AND 20 C
|
|
MS18182
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 50 (SIZE 16 AND 20 C
|
|
MS18183
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 50 (SIZE 16 AND 20 C
|
|
MS18187
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 75 (SIZE 16 AND 20 C
|
|
MS18188
|
INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 75 (SIZE 16 AND 20 C
|
|
MS18192
|
SHIELD, ELECTRICAL CONNECTOR FOR 7, 9, 14, 20, 26, 34, 42, 50 AND 75 CONTAC
|
|
MS18193
|
SHIELD, ELECTRICAL CONNECTORS FOR 66 AND 104 CONTACT CONNECTORS
|
|
MS18194
|
JACKSCREW, ELECTRICAL CONNECTOR MALE AND FEMALE, LONG, TURNABLE
|
|
MS18195
|
JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, SHORT, TURNABLE
|
|
MS18196
|
JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, SHORT, FIXED
|
|
MS18197
|
GUIDE PIN, ELECTRICAL CONNECTOR, MALE AND FEMALE
|
|
MS18199
|
PLATE, RETAINING, RECEPTACLE, ELECTRICAL CONNECTOR FOR SIZE 34, 42, 50 AND
|
|
MS18200
|
PLATE, RETAINING, RECEPTACLE, ELECTRICAL CONNECTOR FOR SIZE 66 AND 104 CONT
|
|
MS18203
|
SHELL, ELECTRICAL, CONNECTOR, PLUG, RECTANGULAR, POLARIZING
|
|
MS18204
|
SHELL, ELECTRICAL CONNECTOR, RECEPTACLE, RECTANGULAR, POLARIZING
|
|
MS18205
|
PIN, STRAIGHT HEADED
|
|
MS18229
|
PLUG FOR O RING GASKET
|
|
MS18268
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PAN
|
|
MS18269
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PAN
|
|
MS18270
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PAN
|
|
MS18271
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PAN
|
|
MS18272
|
CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PAN
|
|
MS18273
|
INSERT ARRANGEMENT, ELECTRICAL CONNECTOR SHELL SIZE 1
|
|
MS18274
|
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR SHELL SIZE 2
|
|
MS18275
|
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR SHELL SIZE 3
|
|
MS18276
|
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR SHELL SIZE 4
|
|
MS18277
|
INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR SHELL SIZE 5
|
|
MS18281
|
CONTACTS PIN AND SOCKET CLASSES G, N, AND H SOLDER TYPE, NON-REMOVABLE
|
|
MS19059
|
BALL, BEARING, FERROUS, CHROME ALLOY STEEL
|
|
MS19060
|
BALL, BEARING, FFRROUS, CORROSION RESISTING STEEL
|
|
MS19067
|
NUTS, PLAIN, ROUND, RETAINING, BALL AND ROLLER BEARING, LIGHT SERIES
|
|
MS19068
|
NUTS, PLAIN, ROUND, RETAINING, BALL AND ROLLER BEARING REGULAR SERIES
|
|
MS19069
|
WASHER, KEY, RETAINING, BALL AND ROLLER BEARING, LIGHT SERIES
|
|
MS19070
|
WASHER, KEY RETAINING, BALL AND ROLLER BEARING, REGULAR SERIES
|
|
MS20001
|
HINGE, BUTT, STRUCTURAL, EXTRUDED
|
|
MS20002
|
WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH
|
|
MS20004THRUMS20024
|
BOLTS, INTERNAL WRENCHING, 160 KSI FTU AND 96 KSI FSU
|
|
MS20033THRUMS20046
|
BOLT, MACHINE, HEXAGON HEAD, 1200 DEG. F
|
|
MS20066
|
KEY, MACHINE, SQUARE IN CROSS-SECTION, BOTH ENDS SQUARE
|
|
MS20073
|
BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, FINE THREAD
|
|
MS20074
|
BOLT, MACHINE, AIRCRAFT, DRILLED HEAD, COARSE THREAD
|
|
MS20230
|
GROMMETS, METALLIC, PLAIN AND SPUR, WITH WASHER, TYPE I AND TYPE III
|
|
MS20253
|
PIN, HINGE
|
|
MS20257
|
HINGE, CONTINUOUS
|
|
MS20270
|
JOINT - UNIVERSAL, PLAIN, LIGHT DUTY
|
|
MS20271
|
JOINT-UNIVERSAL, PLAIN, HEAVY DUTY
|
|
MS20392
|
PIN, STRAIGHT, HEADED, DRILLED SHANK
|
|
MS20427
|
RIVET, SOLID-100 DEG. COUNTERSUNK HEAD, CARBON STEEL, CORROSION-RESISTANT S
|
|
MS20501
|
NUT, SELF LOCKING, PLATE, TWO LUG, 1200 DEG. F, 125 KSI FTU
|
|
MS20600
|
RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE II
|
|
MS20601
|
RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, 100 DEG. FLUSH HEAD, TYP
|
|
MS20604
|
RIVET, BLIND, NONSTRUCTURAL, UNIVERSAL HEAD, CLASS 1
|
|
MS20613
|
RIVET, SOLID-UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT
|
|
MS20615
|
RIVET, SOLID-UNIVERSAL HEAD, BRASS, COPPER, NICKEL-COPPER ALLOY
|
|
MS20658
|
TERMINAL, WIRE ROPE SWAGING, FORK END
|
|
MS20659
|
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS
|
|
MS20663
|
BALL END, WIRE ROPE, SWAGING, DOUBLE SHANK
|
|
MS20664
|
BALL END, WIRE ROPE, SWAGING, SINGLE SHANK
|
|
MS20667
|
TERMINAL, WIRE ROPE, SWAGING, FORK END
|
|
MS20668
|
TERMINAL, WIRE ROPE, SWAGING, EYE END
|
|
MS20756
|
FLANGE, SWIVEL, RETAINING
|
|
MS20757
|
CONNECTOR, FIXED FLANGE, TO HOSE
|
|
MS20758
|
ELBOW, HOSE, FLANGED, SWIVEL, 45 DEGREE
|
|
MS20759
|
ELBOW, HOSE, FLANGED SWIVEL, 90 DEG.
|
|
MS20760
|
CONNECTOR, FIXED FLANGE, TO FLARED TUBE
|
|
MS20761
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREE
|
|
MS20762
|
ELBOW, FLARED TUBE, FLANGED, SWIVEL 90 DEGREE
|
|
MS20819
|
SLEEVE, FLARED TUBE FITTING
|
|
MS20822
|
ELBOW, FLARED TUBE & PIPE THREADS, 90 DEG.
|
|
MS20823
|
ELBOW, 45 DEG. PIPE TO FLARED
|
|
MS20825
|
TEE, PIPE TO TUBE, PIPE THREAD ON SIDE (INACTIVE FOR DESIGN EXCEPT FOR USE
|
|
MS20826
|
TEE, PIPE TO TUBE, PIPE THREAD ON RUN
|
|
MS20913
|
PLUG, PIPE
|
|
MS21025
|
NUT, CASTELLATED, HEXAGON
|
|
MS21026
|
SWITCH, TOGGLE, POSITIVE BREAK, --LEVEL LOCK --MINIATURE, TOGGLE SEALED, SO
|
|
MS21027
|
SWITCH, TOGGLE, POSITIVE BREAK, LEVER LOCK, MINIATURE, TOGGLE SEALED, SOLDE
|
|
MS21042
|
NUT, SELF-LOCKING, 450 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE,
|
|
MS21043
|
NUT, SELF-LOCKING, 800 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE,
|
|
MS21044
|
NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F, 125 KSI FTU AND 60
|
|
MS21045
|
NUT, SELF-LOCKING HEXAGON-REGULAR HEIGHT, 450 DEG. F, 125 KSI FTU
|
|
MS21046
|
NUT, SELF LOCKING, HEXAGON-REGULAR HEIGHT, 800 DEG. F, 125 KSI FTU (ASG)
|
|
MS21047
|
NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG.
|
|
MS21048
|
NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG.
|
|
MS21049
|
NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG. CSK LOW HEIGHT, STEEL, 125 KSI
|
|
MS21050
|
NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG CSK. LOW HEIGHT, CRES, 125 KSI F
|
|
MS21051
|
NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG.
|
|
MS21052
|
NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG A
|
|
MS21053
|
NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK LOW HEIGHT, ALLOY STEEL, 12
|
|
MS21054
|
NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI
|
|
MS21055
|
NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG.
|
|
MS21056
|
NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. A
|
|
MS21057
|
NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, ALLOY STEEL, 12
|
|
MS21058
|
NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI F
|
|
MS21059
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU,
|
|
MS21060
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU,
|
|
MS21061
|
NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU
|
|
MS21062
|
NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU,
|
|
MS21063
|
NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 2
|
|
MS21064
|
NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 4
|
|
MS21065
|
NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES, 125KSI FTU, 450 DEG
|
|
MS21066
|
NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL,
|
|
MS21067
|
NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL,
|
|
MS21068
|
NUT, SELF-LOCKING, CHANNEL, 100 DEG CSK, FLOATING, LOW HEIGHT, CRES, 125KSI
|
|
MS21069
|
NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL
|
|
MS21070
|
NUT, SELF-LOCKING, PLATE, TWO LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES,
|
|
MS21071
|
NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL
|
|
MS21072
|
NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES,
|
|
MS21073
|
NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, STEEL,
|
|
MS21074
|
NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, CRES,
|
|
MS21075
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEI
|
|
MS21076
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEI
|
|
MS21077
|
NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL, 12
|
|
MS21078
|
NUT, SELF-LOCKING, PLATE, TWO LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU,
|
|
MS21079
|
NUT, SELF-LOCKING, GANG CHANNEL, NON-METALLIC INSERT, 125 KSI FTU, 250 DEG.
|
|
MS21080
|
NUT, SELF-LOCKING, PLATE, ONE LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU,
|
|
MS21081
|
NUT, SELF-LOCKING, PLATE, CORNER, NON-METTALIC INSERT, STEEL, 125KSI FTU, 2
|
|
MS21082
|
NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, NON-METALLIC INSERT, STEEL, 12
|
|
MS21083
|
NUT, SELF-LOCKING, HEXAGON NON-METALLIC INSERT, LOW HEIGHT, 250 DEG. F
|
|
MS21084
|
NUT, SELF LOCKING, STEEL, 220 KSI FTU, 450 DEG. F., FLANGED, MS33787 WRENCH
|
|
MS21085
|
NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F, FLANGED, MS33787 WRENCHI
|
|
MS21086
|
NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT,
|
|
MS21087
|
NUT, SELF-LOCKING, PLATE, SIDE BY SIDE REDUCED RIVET SPACING, LOW HEIGHT, C
|
|
MS21090
|
SCREW, SELF-LOCKING, 250 DEG. F, STEEL, 55 KSI FTU, PANHEAD, CROSS RECESSED
|
|
MS21097
|
BOLT, SELF-LOCKING, 250 DEG. F, CRES, 48 KSI FSU, 80 KSI FTU, PAN HEAD, CRO
|
|
MS21133
|
NUT, SELF-LOCKING, STEEL, 180 KSI FTU, 450 DEG. F, FLANGED, MS33787 WRENCHI
|
|
MS21134
|
BOLT, TENSION, STEEL, 180 KSI FTU, 450 DEGREE F, EXTERNAL WRENCHING, SPLINE
|
|
MS21140
|
FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, 100 DE
|
|
MS21141
|
FASTENER, BLIND, HIGH STRENGTH, PULL TYPE, POSITIVE MECHANICAL LOCK, PROTRU
|
|
MS21155
|
BEARING, PLAIN, SELF ALIGNING
|
|
MS21206
|
WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUD
|
|
MS21207
|
SCREW, TAPPING, 100 DEGREE FLAT HEAD, SPACED THREAD
|
|
MS21224
|
NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED, ASSEMBLED WASHER, 25
|
|
MS21225
|
NUT, SELF-LOCKING, CASTELLATED, HEXAGON - 800 DEG. F
|
|
MS21230
|
BEARING, PLAIN, SELF - ALIGNING, GROOVED OUTER RING TFE LINED, WIDE
|
|
MS21231
|
BEARING, PLAIN, SELF-ALIGNING, TFE LINED, WIDE
|
|
MS21232
|
BEARING, PLAIN, SELF-ALIGNING, GROOVE OUTER RING, TFE LINED, NARROW
|
|
MS21233
|
BEARING, PLAIN, SELF-ALIGNING, TFE LINED, NARROW
|
|
MS21237
|
RING, CARGO TIEDOWN (25,000 LB), TYPE IV
|
|
MS21244
|
NUT, CASTELLATED, HEXAGON, COUNTERBORED ASSEMBLED WASHER, 450 DEG. F (FOR S
|
|
MS21245
|
NUT, SELF-LOCKING, HEXAGON, THIN, 450 DEGREE F, 80 KSI FTU
|
|
MS21250
|
BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12-POINT, 180 KSI FTU, 4
|
|
MS21251
|
TURNBUCKLE BODY, CLIP LOCKING
|
|
MS21252
|
CLEVIS, END, TURNBUCKLE, CLIP LOCKING
|
|
MS21253
|
CLEVIS END, TURNBUCKLE, CLIP LOCKING, (FOR BEARING)
|
|
MS21254
|
CONNECTOR, EYE END, TURNBUCKLE, CLIP LOCKING
|
|
MS21255
|
EYE END, TURNBUCKLE, CLIP LOCKING, (FOR WIRE ROPE)
|
|
MS21256
|
CLIP, LOCKING, TURNBUCKLE
|
|
MS21258
|
WASHER, KEY, RETAINING, WHEEL BEARING
|
|
MS21259
|
TERMINAL, WIRE ROPE, STUD
|
|
MS21260
|
TERMINAL, WIRE ROPE, STUD
|
|
MS21266
|
GROMMET, PLASTIC, EDGING
|
|
MS21279
|
BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER, .190-32 (MIL-S-8879
|
|
MS21287
|
SCREW, MACHINE - STEEL, DRILLED DOUBLE HEXAGON, EXTENDED WASHER, .164-36 (M
|
|
MS21295
|
SCREWS, SELF LOCKING, 250 DEG. F, CYLINDRICAL HEAD, HEXAGONAL WRENCHING SOC
|
|
MS21296
|
BOLT, TENSION, STEEL; 260 KSI FTU, 450 DEG. F, EXTERNAL WRENCHING, SPLINE D
|
|
MS21297
|
BOLT, TENSION, STEEL, 220 KSI FTU, 450 DEG. F, EXTERNAL WRENCHING, SPLINE D
|
|
MS21299
|
WASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUD
|
|
MS21300
|
ANCHOR - SEMI-PERMANENT MOORING
|
|
MS21314
|
STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUIT, AND CABLE
|
|
MS21315
|
STRAP, RETAINING, TWO HOLE, FOR TUBING
|
|
MS21316
|
THUMBSCREW (SHOULDERED), FLAT POINT, CARBON STEEL, CADMIUM PLATED, UNC-2A
|
|
MS21326
|
STUD, STYLE IV SNAPSLIDE FASTENER
|
|
MS21340
|
NUT, PLAIN, HEXAGON, ELECTRICAL, THIN (WITH LOCKWIRE HOLES)
|
|
MS21344
|
FITTING - INSTALLATION OF FLARED TUBE, STRAIGHT THREADED CONNECTORS, DESIGN
|
|
MS21347
|
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE, TOGGLE SEALED, AND --LEVER LOCK-
|
|
MS21353
|
SWITCH, TOGGLE, POSITIVE BREAK, SPECIAL CIRCUIT, MINIATURE, TOGGLE SEALED,
|
|
MS21354
|
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE, TOGGLE SEALED, PRINTED CIRCUIT B
|
|
MS21355
|
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE, TOGGLE SEALED, PRINTED CIRCUIT B
|
|
MS21431
|
BEARING, ROLLER, SELF-ALIGNING SINGLE ROW ANTI-FRICTION, SEALED -65 TO 350
|
|
MS21438
|
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE
|
|
MS21439
|
BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE
|
|
MS21447
|
BEARING, ROLLER, NEEDLE, TRACK ROLLER CROWN RADIUSED O.D. INTEGRAL STUD, TY
|
|
MS21900
|
ADAPTER, FLARELESS TUBE TO A FLARED TUBE
|
|
MS21902
|
UNION, FLARELESS TUBE
|
|
MS21904
|
ELBOW, FLARELESS TUBE, 90 DEG.
|
|
MS21905
|
TEE, FLARELESS TUBE
|
|
MS21906
|
CROSS, FLARELESS TUBE
|
|
MS21907
|
ELBOW, BULKHEAD UNIVERSAL, 45 DEG., FLARELESS TUBE
|
|
MS21908
|
ELBOW, BULKHEAD UNIVERSAL 90 DEG., FLARELESS TUBE
|
|
MS21909
|
TEE, BULKHEAD AND UNIVERSAL, FLARELESS TUBE
|
|
MS21910
|
TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON SIDE
|
|
MS21911
|
TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
|
|
MS21912
|
TEE, FLARELESS TUBE WITH BULKHEAD ON RUN
|
|
MS21913
|
PLUG, FLARELESS TUBE
|
|
MS21914
|
CAP, PRESSURE SEAL, FLARELESS TUBE FITTING
|
|
MS21915
|
ADAPTER, STRAIGHT, TUBE TO BOSS
|
|
MS21916
|
REDUCER, EXTERNAL THREAD, FLARELESS TUBE
|
|
MS21919
|
CLAMP, LOOP TYPE, CUSHIONED, SUPPORT
|
|
MS21921
|
NUT, SLEEVE COUPLING, FLARELESS
|
|
MS21922
|
SLEEVE, COUPLING, FLARELESS
|
|
MS21923
|
ADAPTER, FLARELESS TUBE, BULKHEAD AND UNIVERSAL TO FLARED TUBE
|
|
MS21924
|
UNION, FLARELESS TUBE, BULKHEAD AND UNIVERSAL
|
|
MS21925
|
ELBOW, 90 DEGREE UNIVERSAL, FLARELESS TUBE, HIGH PROFILE (ASG)
|
|
MS21926
|
ELBOW, 90 DEG. UNIVERSAL, FLARELESS TUBE, LOW PROFILE
|
|
MS21937
|
NUT, CLUSTER FITTING, RETAINER (ASG)
|
|
MS21938
|
BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS
|
|
MS21942
|
BODY, CLUSTER FITTING, ONE WAY, FLARELESS
|
|
MS21945
|
BODY, CLUSTER FITTING, THREE-WAY, FLARELESS
|
|
MS21946
|
BODY, CLUSTER FITTING, ONE WAY, INTERNAL BOSS (ASG)
|
|
MS21950
|
BOLT, CLUSTER FITTING SINGLE PORT THROUGH, FLARE
|
|
MS21953
|
BODY, CLUSTER FITTING ONE WAY, FLARE
|
|
MS21954
|
BODY, CLUSTER FITTING TWO WAY 90 DEG., FLARE
|
|
MS21955
|
BODY, CLUSTER FITTING TWO WAY 180 DEG., FLARE
|
|
MS21959
|
BODY, CLUSTER FITTING, TWO WAY, 90 DEG., INTERNAL BOSS (ASG)
|
|
MS21960
|
BODY, CLUSTER FITTING, THREE WAY, INTERNAL BOSS (ASG)
|
|
MS21984
|
CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE, PUSH-PULL, 3-PHASE, 5 THRU 60 AMP., TY
|
|
MS22073
|
CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I
|
|
MS24000
|
FUSE HOLDER, BLOCK-TYPE, 1 -, 2 -, AND 3 - POLE, 1-TO 30-AMPERE, AIRCRAFT
|
|
MS24001
|
FUSE HOLDER, BLOCK-TYPE, 1 -, 2 -, AND 3 - POLE, 35-TO 60-AMPERE, AIRCRAFT
|
|
MS24056
|
CONNECTOR, PLUG-RECEPTACLE, ELECTRICAL, HEXAGONAL, 9 CONTACTS, MALE, 7.5 AM
|
|
MS24120
|
RING, COUPLING, ROTATING
|
|
MS24140
|
RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEA
|
|
MS24141
|
RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1PST (NO), TYPE I, HERMETICALLY SEALE
|
|
MS24142
|
RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1PST (NO), TYPE I, HERMETICALLY SEALE
|
|
MS24143
|
RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PST (N.O.), TYPE I, HERMETICALLY SEA
|
|
MS24149
|
RELAYS, ELECTROMAGNETIC, 2 PDT 10 AMPERES, TYPE I, HERMETICALLY SEALED
|
|
MS24166
|
RELAYS, ELECTROMAGNETIC, 50 AMPERES, 1 PST, (N.O.) TYPE II, NONHERMETICALLY
|
|
MS24168
|
RELAYS, ELECTROMAGNETIC, 100 AMPERES, 3 PST (N.O.), TYPE I, HERMETICALLY SE
|
|
MS24171
|
RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1PST (NO) , TYPE II, NON-HERMETICALLY
|
|
MS24172
|
RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1PST (N O), TYPE III, NON-HERMETICALL
|
|
MS24178
|
RELAY, 55 AMP, 2PST, N.O. TYPE II, NON HERMETICALLY SEALED
|
|
MS24179
|
RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N. O.), TYPE III, NON-HERMETIC
|
|
MS24182
|
RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1 PST, N.O., TYPE I, HERMETICALLY SEA
|
|
MS24183
|
RELAY, ELECTROMAGNETIC, 200 AMPERES, 1PST (NO), TYPE I, HERMETICALLY SEALED
|
|
MS24184
|
RELAYS, ELECTROMAGNETIC, 300 AMPERES, 1 PST, N.O. TYPE I, WITH AUXILIARY CO
|
|
MS24185
|
RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST, N. O. TYPE II, NON-HERMETICALL
|
|
MS24187
|
RELAYS, ELECTROMAGNETIC, 50/25 AMPERES, 1PDT (NO/NC), TYPE II, NONHERMETIC
|
|
MS24192
|
RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3PST, N.O. TYPE II, NON-HERMETICALLY S
|
|
MS24193
|
RELAY ELECTROMAGNETIC, 50 AMPERES, 3 PST, N.O. TYPE II, NON - HERMETICALLY
|
|
MS24236
|
CONNECTOR, PLUG, ELECTRICAL, STRAIGHT
|
|
MS24285
|
CONNECTOR, ELECTRICAL, STYLE S, RACK AND PANEL, MINIATURE
|
|
MS24286
|
CONNECTOR, ELECTRICAL, STYLE P, RACK AND PANEL, MINIATURE
|
|
MS24287
|
MATED ASSEMBLY, CONNECTOR, RACK AND PANNEL, MINIATURE
|
|
MS24288
|
INSERT ARRANGEMENTS, ELECTRICAL, CONNECTOR, RACK AND PANEL
|
|
MS24333
|
COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT, FLARED FITTIN
|
|
MS24334
|
COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, FLARELESS FITTING TO INTERNAL T
|
|
MS24335
|
FLANGE, BULKHEAD MOUNTING, HYDRAULIC, SELF-SEALING COUPLING
|
|
MS24376
|
RELAYS, ELECTROMAGNETIC, 50 AMPERES, 3PST (NO), TYPE I, HERMETICALLY SEALED
|
|
MS24388
|
TEE, FLARED TUBE, INTERNAL THREAD ON SIDE, PRECISION TYPE
|
|
MS24389
|
TEE, TUBE, INTERNAL THREAD ON RUN, PRECISION TYPE
|
|
MS24390
|
TEE, FLARED TUBE WITH BULKHEAD ON RUN, PRECISION TYPE
|
|
MS24391
|
PLUG - BLEEDER, TUBE PRECISION TYPE
|
|
MS24392
|
NIPPLE, TUBE, PRECISION TYPE
|
|
MS24393
|
NIPPLE, TUBE, 3/8 BULKHEAD, PRECISION TYPE
|
|
MS24394
|
ELBOW, TUBE, BULKHEAD, 90 DEG., PRECISION TYPE
|
|
MS24395
|
TEE, TUBE, BULKHEAD, PRECISION TYPE
|
|
MS24396
|
ELBOW, TUBE, BULKHEAD, 45 DEG., PRECISION TYPE
|
|
MS24397
|
REDUCER, BOSS, PRECISION TYPE
|
|
MS24398
|
ADAPTER, STRAIGHT, TUBE TO BOSS, PRECISION TYPE
|
|
MS24399
|
REDUCER, TUBE, PRECISION TYPE
|
|
MS24401
|
ELBOW, TUBE, 90 DEG., PRECISION TYPE
|
|
MS24402
|
TEE, TUBE, PRECISION TYPE
|
|
MS24403
|
CROSS, TUBE, PRECISION TYPE
|
|
MS24404
|
PLUG, TUBE, PRECISION TYPE
|
|
MS24405
|
ADAPTER, FLARELESS TUBE TO FLARED TUBE PRECISION TYPE
|
|
MS24417
|
GUARD, SWITCH, 2 OR 3 POSITION
|
|
MS24456
|
SWITCH, SENSITIVE, SEALED, SPDT, CLASS A5 OR B8
|
|
MS24461
|
BEARING ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
|
|
MS24478
|
GAGE, SINGLE 1 INCH DIAL, PNEUMATIC PRESSURE
|
|
MS24487
|
NIPPLE, TUBE, 37 DEG TO 45 DEG. SEAT
|
|
MS24513
|
LAMP, INCANDESCENT, SINGLE CONTACT BAYONET INDEXING CANDELABRA, GG-12B1 BUL
|
|
MS24523
|
SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED
|
|
MS24524
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
|
|
MS24525
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED
|
|
MS24563
|
COUPLING FLANGES, V-BAND, PROFILE DIMENSIONS FOR (INACTIVE FOR NEW DISIGN -
|
|
MS24568
|
RELAYS, ELECTROMAGNETIC, 10 AMPERS, 4 PDT, TYPE I, HERMETICALLY SEALED
|
|
MS24571
|
CIRCUIT BREAKER, AIRCRAFT, TRIP FREE, 2 1/2 TO 50 AMPERES, 121.1 DEG. C AMB
|
|
MS24572
|
INDICATOR - POSITION VARIABLE NOZZLE
|
|
MS24586
|
SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS
|
|
MS24587
|
ADAPTER, STRAIGHT, TUBE TO HOSE - REUSABLE, HYDRAULIC, FUEL AND OIL LINES
|
|
MS24588
|
NIPPLE, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES. 3/1
|
|
MS24589
|
NIPPLE, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES. 1 T
|
|
MS24590
|
SOCKET, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES, 3/1
|
|
MS24612
|
SWITCH, TOGGLE, POSITIVE BREAK LEVER LOCK, ENVIRONMENTALLY SEALED, SCREW TE
|
|
MS24613
|
SWITCH, TOGGLE, POSITIVE BREAK, LEVER LOCK, ENVIRONMENTALLY SEALED, SCREW T
|
|
MS24614
|
SWITCH, TOGGLE, POSITIVE BREAK, LEVER LOCK, ENVIRONMENTALLY SEALED, SCREW T
|
|
MS24627
|
SCREW, TAPPING-THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 DEG. COUNTERSUNK
|
|
MS24628
|
SCREW, TAPPING-THREAD CUTTING, TYPES D,F,G OR T, FLAT 82 DEG. COUNTERSUNK H
|
|
MS24632
|
SCREW, TAPPING, THREAD FORMING- TYPES AB, B AND BP, APPROXIMATE HOLE SIZES
|
|
MS24655
|
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE TOGGLE SEALED, SINGLE POLE, SOLDE
|
|
MS24656
|
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE, TOGGLE SEALED, DOUBLE POLE, SOLD
|
|
MS24658
|
SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK
|
|
MS24659
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK
|
|
MS24660
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK
|
|
MS24662
|
RIVET, BLIND, UNIVERSAL HEAD, DRIVE TYPE
|
|
MS24674
|
SCREW, CAP, SOCKET-HEAD, HEXAGON, DRILLED CORROSION RESISTING STEEL (UNC-3A
|
|
MS24693
|
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG., CROSS RECESSED, UNC-2A AND
|
|
MS24694
|
SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG., STRUCTURAL, CROSS RECESSED
|
|
MS24695
|
CONNECTOR, PLUG AND RECEPTACLE, (ELECTRICAL, WATERPROOF) AND ACCESSORIES:GE
|
|
MS24700
|
BUSHING, FIXED, CONNECTOR, RACK AND PANEL, MINIATURE
|
|
MS25002
|
SWITCH, ROTARY, 28/115 VOLTS
|
|
MS25018
|
CONNECTOR, RECEPTACLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC JET STA
|
|
MS25024
|
RELAY, 10 AMP, 4 PDT, SEALED, CLASS 0
|
|
MS25041
|
LIGHT, INDICATOR, PRESS TO TEST, SMALL
|
|
MS25042
|
COVER, ELECTRICAL CONNECTOR; PLUG, AN TYPE
|
|
MS25043
|
COVER, ELECTRICAL, CONNECTOR, RECEPTACLE, AN TYPE
|
|
MS25054
|
INSULATOR, LEAD-THROUGH ANTENNA
|
|
MS25055
|
ELBOW, LEAD-THROUGH INSULATOR, ANTENNA
|
|
MS25056
|
SLEEVE, SUPPORT, ANTENNA, EXTERNAL THREAD
|
|
MS25065
|
FERRULE, FLEXIBLE CONDUIT, RADIO FREQUENCY SHIELDING
|
|
MS25067
|
CONDUIT ASSEMBLY, FLEXIBLE, RADIO FREQUENCY SHIELDING
|
|
MS25081
|
WASHER, KEY
|
|
MS25082
|
NUT, PLAIN, HEXAGON, ELECTRICAL-THIN
|
|
MS25083
|
JUMPER ASSEMBLY, ELECTRIC, BONDING AND CURRENT RETURN
|
|
MS25126
|
SWITCHES, TOGGLE, UNSEALED AND SEALED TOGGLE GENERAL SPECIFICATION FOR
|
|
MS25182
|
PLUG, ELECTRIC, FOUR-WIRE, AIRCRAFT STORAGE BATTERY
|
|
MS25183
|
CONNECTOR, PLUG, ELECTRIC, POTTING SEAL, SOLDER CONTACTS, AN TYPE
|
|
MS25201
|
SWITCH, TOGGLE, TWO POLE, SEALED TOGGLE
|
|
MS25214
|
GUARD, SWITCH, 3 POSITION
|
|
MS25219
|
LIGHT - NAVIGATIONAL AND WARNING, AIRCRAFT
|
|
MS25223
|
GUARD, SWITCH, 3 POSITION
|
|
MS25224
|
GUARD, SWITCH, 2 POSITION
|
|
MS25225
|
GUARD, SWITCH, 3 POSITION
|
|
MS25244
|
CIRCUIT BREAKER, TRIP FREE, PUSH PULL, 5 THRU 35 AMPRERE, TYPE I
|
|
MS25251
|
PLUG, END SEAL, ELECTRIC CONNECTOR
|
|
MS25267
|
RELAYS, ELECTROMAGNETIC, 5 AMPERES, 4 PDT, TYPE I, SOLDER HOOK, HERMETICALL
|
|
MS25269
|
RELAYS, ELECTROMAGNETIC, 5 AMPERES, 6 PDT, TYPE I, HERMETICALLY SEALED
|
|
MS25271
|
RELAYS, ELECTROMAGNETIC, 10 AMPERES, 4 PDT, TYPE 1, SOLDER HOOK HERMETICALL
|
|
MS25274
|
CAP, ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105 DEG. C TO
|
|
MS25281
|
CLAMP, LOOP, PLASTIC, WIRE SUPPORT
|
|
MS25306
|
SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SCREW TERMINAL, SIN
|
|
MS25307
|
SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SCREW TERMINAL, DOU
|
|
MS25308
|
SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SCREW TERMINAL, FOU
|
|
MS25331
|
LIGHT ASSEMBLY, PRESS TO TEST INDICATOR
|
|
MS25358
|
LIGHT, DOME, CABIN-RED AND WHITE
|
|
MS25361
|
CIRCUIT BREAKER AIRCRAFT, TRIP FREE, PUSH-PULL, 50 THRU 100 AMPS, TYPE I
|
|
MS25384
|
ELECTROSTATIC DISCHARGER JUMPER, FUEL NOZZLE -TO- AIRCRAFT
|
|
MS25435
|
TERMINAL, LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE CLASS
|
|
MS25436
|
TERMINAL, LUG, CRIMP STYLE 90 DEG UPRIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE,
|
|
MS25439
|
SPLICE-PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE, CLASS
|
|
MS25440
|
WASHERS, FOR USE WITH AIRCRAFT ALUMINUM TERMINALS
|
|
MS25486
|
CONNECTOR, PLUG, ATTACHABLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOL
|
|
MS26517
|
HANDLES, CONTROL, AIRCRAFT THROTTLE, LARGE
|
|
MS26574
|
CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 1/2 THRU 20 AMP, TYPE I
|
|
MS26577
|
SILICONE O-RINGS FOR GENERAL PURPOSE USE.
|
|
MS27039
|
SCREW, MACHINE - PAN HEAD, STRUCTURAL, CROSS RECESSED
|
|
MS27070
|
SLEEVE, HOSE COUPLING
|
|
MS27073
|
NUT, TUBE COUPLING - SWIVEL
|
|
MS27074
|
WIRE, RETAINER
|
|
MS27084
|
ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEG.
|
|
MS27111
|
WASHER, KEY, FLAT, GENERAL PURPOSE
|
|
MS27129
|
WASHER, FINISHING-COUNTERSUNK
|
|
MS27130
|
NUT, PLAIN, BLIND RIVET-FLAT AND COUNTERSUNK HEAD, OPEN END
|
|
MS27134
|
TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING, 300W/6.6A/6.6A/5000V
|
|
MS27146
|
CONNECTOR, RECEPTACLE, ELECTRICAL: DOUBLE CONTACT, WATERPROOF
|
|
MS27183
|
WASHER, FLAT (ROUND, STEEL, CADMIUM PLATED) GENERAL PURPOSE
|
|
MS27194
|
SEAL, PLAIN, RUBBER, (MINUS 65 TO PLUS 160 DEG. F FUEL RESISTANT), MOLD IN
|
|
MS27196
|
GASKET, RUBBER, FLUID RESISTANT, OILS, SYNTHETIC OILS, AND FUELS (MINUS 65
|
|
MS27198
|
SEAL, PLAIN, RUBBER, (MINUS 65 TO PLUS 350 DEG. F FUEL RESISTANT) MOLD IN G
|
|
MS27222
|
RELAYS, ELECTROMAGNETIC, 50 AMPERES, 3 PST, N.O. TYPE I, HERMETICALLY SEALE
|
|
MS27224
|
90 DEG. SWIVEL NUT ASSEMBLY, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FU
|
|
MS27226
|
45 DEG. SWIVEL NUT ASSEMBLY, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FU
|
|
MS27228
|
90 DEG. FLANGE ASSEMBLY, ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL A
|
|
MS27242
|
RELAYS, ELECTROMAGNETIC, 100 AMPERES, 1PST, N.O. TYPE I, HERMETICALLY SEALE
|
|
MS27243
|
TERMINAL COVER-RELAY
|
|
MS27267
|
SHELL, ELECTRICAL CONNECTOR - RAMP POWER, 416/240 VOLTS
|
|
MS27282
|
INSERT, ELECTRICAL CONNECTOR - RAMP POWER, 416/240 VOLTS, FEMALE
|
|
MS27286
|
TRANSFORMER, POWER, ISOLATION: AIRPORT LIGHTING 200W/20A/6.6A/5000V
|
|
MS27288
|
TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING, 200W/6.6A/6.6A/5000V
|
|
MS27289
|
TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING 30-45W/6.6A/6.6A/5000V
|
|
MS27290
|
BUSING CABLE ADAPTER
|
|
MS27302
|
TRANSFORMER, POWER, ISOLATION; AIRPORT LIGHTING, 500W/20A/20A/5000V
|
|
MS27404
|
ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
|
|
MS27406
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED
|
|
MS27407
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED
|
|
MS27408
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK
|
|
MS27409
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK
|
|
MS27418
|
RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3PST-NO, TYPE I, HERMETICALLY SEALED,
|
|
MS27429
|
SPLICE, CONDUCTOR, DISCONNECT, CRIMP STYLE, COPPER, INSULATED BARREL, TYPE
|
|
MS27466
|
CONNECTOR, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONE
|
|
MS27467
|
CONNECTOR, PLUG, ELECTRICAL STRAIGHT, CRIMP TYPE, BAYONET COUPLING SERIES I
|
|
MS27468
|
CONNECTOR, RECEPTACLE, ELECTRICAL JAM NUT MOUNTING, CRIMP TYPE, BAYONET COU
|
|
MS27469
|
CONNECTOR, RECEPTACLE, ELECTRICAL WALL MOUNTING FLANGE, SOLDER TYPE, HERMET
|
|
MS27470
|
CONNECTOR, RECEPTACLE, ELECTRICAL JAM NUT MOUNTING, SOLDER TYPE, HERMETIC S
|
|
MS27471
|
CONNECTOR, RECEPTACLE, ELECTRICAL SOLDER MOUNTING, SOLDER TYPE, HERMETIC SE
|
|
MS27479
|
CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET
|
|
MS27480
|
CONNECTOR, PLUG, ELECTRIC, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES I
|
|
MS27481
|
CONNECTOR, RECEPTACLE, ELECTRIC, JAM NUT MOUNTING, CRIMP TYPE, BAYONET COUP
|
|
MS27487
|
KIT, STRAIGHT AND 90 DEG. THREADED ADAPTER, EMR HARDWARE FOR MIL-C-38999 CO
|
|
MS27488
|
PLUG, END SEAL, ELECTRICAL CONNECTOR
|
|
MS27489
|
ADAPTER, REDUCER, EMR HARDWARE, FOR MIL-C-38999 CONNECTORS
|
|
MS27496
|
CONNECTOR, RECEPTACLE, ELECTRICAL BOX MOUNTING, CRIMP TYPE, BAYONET COUPLIN
|
|
MS27500
|
CONNECTOR, PLUG, ELECTRICAL, 90 DEGREES ELBOW, CRIMP TYPE, BAYONET COUPLING
|
|
MS27501
|
COVER, PROTECTIVE, ELECTRICAL CONNECTOR PLUG, BAYONET COUPLING, SERIES I
|
|
MS27502
|
COVER, ELECTRICAL CONNECTOR, PROTECTIVE, RECEPTACLE, BAYONET COUPLING, SERI
|
|
MS27504
|
CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING FLANGE, CRIMP TYPE, BAYONET C
|
|
MS27505
|
CONNECTOR, RECEPTACLE, ELECTRICAL, BACK PANEL, BOX MOUNTING FLANGE, CRIMP T
|
|
MS27574
|
CABLE, AIRCRAFT AND AGE GROUNDING
|
|
MS27576
|
BOLT, SELF-RETAINING, IMPEDANCE TYPE, 95 KSI FSU, HEX HEAD, 450 DEG. F
|
|
MS27577
|
SCREW, CLOSE TOLERANCE, 95 KSI FSU, FLUSH HEAD, 450 DEG. F
|
|
MS27595
|
TEFLON RING
|
|
MS27656
|
CONNECTOR, RECEPTACLE, ELECTRICAL, BACK PANEL WALL MOUNTING FLANGE, CRIMP T
|
|
MS27661
|
CONNECTOR, PLUG, ELECTRICAL, CRIMP TYPE, LANYARD RELEASE, FAIL-SAFE, SERIES
|
|
MS27662
|
CONNECTOR, RECEPTACLE, ELECTRICAL, THRU BULKHEAD MOUNTING, BAYONET COUPLING
|
|
MS27708
|
SWITCH, TOGGLE, FOUR POSITION ON, CENTER OFF
|
|
MS27719
|
SWITCH, TOGGLE, MINIATURE DOUBLE POLE, TOGGLE SEAL
|
|
MS27720
|
SWITCH, TOGGLE, MINIATURE, SINGLE POLE, TOGGLE SEAL, LEVER LOCK
|
|
MS27721
|
SWITCH, TOGGLE, MINIATURE, DOUBLE POLE, TOGGLE SEAL, LEVER LOCK
|
|
MS27722
|
SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
|
|
MS27723
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
|
|
MS27724
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINAL
|
|
MS27741
|
CONNECTOR, ELECTRICAL, INDIVIDUAL SHIELD TERMINATION
|
|
MS27743
|
RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PDT, TYPE I, HERMETICALLY SEALED, PE
|
|
MS27754
|
SWITCH, TOGGLE, MINIATURE, DOUBLE POLE, TOGGLE SEAL, LEVER LOCK
|
|
MS27769
|
PLUG, PIPE, COUNTERSINK HEX HEAD
|
|
MS27785
|
SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS
|
|
MS27786
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINAL
|
|
MS27788
|
SWITCH, TOGGLE, TOW POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WI
|
|
MS27789
|
SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED W
|
|
MS27796
|
CONNECTOR-BAYONET, THREE PIN, OXYGEN MASK
|
|
MS27817
|
TIRE - PNEUMATIC REBUILT, TYPE V11 36 X 11/22 PR
|
|
MS27952
|
NUT, PLAIN-HEXAGON, JAM, LEFT HAND
|
|
MS27975
|
CLEVIS, ROD END-ADJUSTING, WIDE AND NARROW FORKS
|
|
MS27977
|
FASTENER, SNAP, STYLE 1 (LARGE CURTAIN TYPE)
|
|
MS27984
|
FASTENERS, SNAP, STYLE 5 (SCALLOPED BUTTON HEAD TYPE)
|
|
MS27997
|
RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PST, N.O. TYPE I, HERMETICALLY SEALE
|
|
MS28009
|
INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150
|
|
MS28028
|
THERMOMETER SELF-INDICATING, BIMETALLIC
|
|
MS28034
|
BULBS, TEMPERATURE, ELECTRICAL RESISTANCE (-70 DEG. C TO +300 DEG. C)
|
|
MS28055
|
FLANGE, MOUNTING, ATTACHABLE, AIRCRAFT INSTRUMENT (ASG)
|
|
MS28741
|
HOSE ASSEMBLY, DETACHABLE END FITTING, MEDIUM PRESSURE
|
|
MS28759
|
HOSE ASSEMBLY, RUBBER, HYDRAULIC, (3,000 PSI), FLARED TUBE
|
|
MS28760
|
FITTING END, ATTACHABLE, HYDRAULIC AND PNEUMATIC HIGH PRESSURE HOSE (3,000
|
|
MS28761
|
FITTING END, ATTACHABLE, HYDRAULIC HIGH PRESSURE HOSE (3,000 PSI), FLARELES
|
|
MS28762
|
HOSE ASSEMBLY, HYDRAULIC AND PNEUMATIC HIGH PRESSURE (3,000 P.S.I.) FLARELE
|
|
MS28764
|
VALVE, CHECK, CONTROLLABLE, ROTARY-ACTION, HYDRAULIC, 3,000 PSI, TYPE II SY
|
|
MS28768
|
VALVE, CHECK, CONTROLLABLE, PLUNGER-TYPE, HYDRAULIC, 3,000 PSI, TYPE II SYS
|
|
MS28771
|
VALVE, CHECK, HYDRAULIC, FLARED, 3,000 PSI, TYPE II SYSTEMS
|
|
MS28772
|
D-RING
|
|
MS28773
|
TEFLON RING
|
|
MS28774
|
TEFLON BACKUP SINGLE TURN
|
|
MS28775
|
O-RINGS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS, TYPE II SYSTEMS @ -65° TO 275°F.
|
|
MS28776
|
METAL
|
|
MS28777
|
LEATHER
|
|
MS28778
|
BOSS GASKETS FOR USE WITH MIL-H-5606B TYPE HYDRAULIC OILS IN TYPE I SYSTEMS @ -65° TO 250° F
|
|
MS28782
|
TEFLON RING
|
|
MS28783
|
TEFLON RING
|
|
MS28784
|
USE MS28775
|
|
MS28900
|
FOR ELECTRICAL USE NEOPRENE. WEATHER RESISTANT
|
|
MS28903
|
WIPER
|
|
MS28936
|
FUSE, SELF INDICATING CURRENT LIMITER, AIRCRAFT
|
|
MS28937
|
FUSE, LIMITER TYPE, ENCLOSED LINK, 5-60 AMP, AIRCRAFT
|
|
MS29512
|
O-RINGS FOR USE IN AIRCRAFT FUEL SYSTEMS WITH JET FUELS @ -65° TO 200°F BOSS GASKETS.
|
|
MS29513
|
O-RINGS FOR USE IN AIRCRAFT FUEL SYSTEMS WITH JET FUELS @ -65° TO 200° F
|
|
MS29520
|
ENVELOPE DIMENSIONS NOZZLE, PRESSURE FUEL SERVICING LOCKING AIRCRAFT, TYPE
|
|
MS29525
|
CAP-PRESSURE FUEL SERVICING, NOMINAL 2 1/2 INCH DIAMETER, FLUSH TYPE
|
|
MS29526
|
CAP-PRESSURE FUEL SERVICING, NOMINAL 2 1/2 INCH DIAMETER NON-FLUSH TYPE
|
|
MS29561
|
PACKING, PREFORMED, O RING, SYNTHETIC LUBRICANT RESISTANT
|
|
MS29561
|
FOR MIL-L-7808 FLUIDS. THIS DRAWING COVERS ALL SIZES EXCEPT THE TUBE FITTING SIZES.
|
|
MS3100
|
CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE
|
|
MS3101
|
CONNECTOR, PLUG, ELECTRIC, CABLE CONNECTING, SOLDER CONTACTS, AN TYPE
|
|
MS3102
|
CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, SOLDER CONTACTS, AN TYPE
|
|
MS3105
|
CONNECTOR, RECEPTACLE, ELECTRIC DUMMY STOWAGE
|
|
MS3106
|
CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE
|
|
MS3107
|
CONNECTOR PLUG, ELECTRIC, QUICK DISCONNECT
|
|
MS3108
|
CONNECTORS, PLUG, ELECTRIC, SOLDER CONTACT, 90 DEGREE, AN TYPE
|
|
MS3130
|
CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, WALL MTG. FLANGE, PUSH PULL C
|
|
MS3140
|
CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PUL
|
|
MS3144
|
CONNECTOR, RECEPTACLE, ELECTRIC CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COU
|
|
MS3147
|
CONNECTOR, PLUG, ELECTRIC CRIMP TYPE, PUSH - PULL COUPLING SERIES 2 (CLASS
|
|
MS3148
|
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE LANYARD, PUSH-PULL COUPLING SERIES 2
|
|
MS3155
|
CONNECTOR, ELECTRIC, REAR ACCESSORY DESIGN STANDARD
|
|
MS3157
|
INSERT ARRANGEMENT, MIL-C-81659 ELECTRIC CONNECTOR, SERIES 1 AND 2
|
|
MS3182
|
COVER, PROTECTIVE, ELECTRIC CONNECTOR, PLUG, PUSH-PULL COUPLING
|
|
MS3186
|
CONNECTOR MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN, HEXAGON
|
|
MS3215
|
RING, RETAINING, EXTERNAL, "E", REINFORCED (REDUCED SECTION TYPE)
|
|
MS3216
|
RING, RETAINING, EXTERNAL, PRONG-LOCK (REDUCED SECTION TYPE)
|
|
MS3217
|
RING, RETAINING, EXTERNAL, HEAVY-DUTY (TAPERED SECTION TYPE)
|
|
MS3320
|
CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE, PUSH PULL, 1/2 THRU 20 AMPS, TYPE I -5
|
|
MS3325
|
DRIVE PAD-ACCESSORY, 2.653 BC SQUARE, DESIGN STANDARD FOR
|
|
MS3326
|
DRIVE PAD - ACCESSORY, 5,000 BC SQUARE, DESIGN STANDARD FOR
|
|
MS3327
|
DRIVE PAD - ACCESSORY, 5,000 BC ROUND, DESIGN STANDARD FOR
|
|
MS3328
|
DRIVE PAD - ACCESSORY, 8,000 BC ROUND, DESIGN STANDARD FOR
|
|
MS3329
|
DRIVE PAD - ACCESSORY, 10,000 BC ROUND, DESIGN STANDARD FOR
|
|
MS3336
|
ACCESSORY DRIVES AIRCRAFT ENGINE, REFERENCE CHART FOR
|
|
MS3349
|
PLUG, ELECTRIC, TWO-WIRE, AIRCRAFT STORAGE BATTERY
|
|
MS33515
|
FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS
|
|
MS33522
|
RIVETS, BLIND, STRUCTURAL, MECHANICALLY LOCKED AND FRICTION RETAINER SPINDL
|
|
MS33533
|
TOLERANCES - SEAMLESS CORROSION-RESISTANT STEEL TUBING ROUND
|
|
MS33537
|
INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, ST
|
|
MS33547
|
PINS, SPRING, FUNCTIONAL LIMITATIONS OF
|
|
MS33557
|
NONSTRUCTURAL RIVETS FOR BLIND ATTACHMENT; LIMITATIONS FOR DESIGN AND USAGE
|
|
MS33559
|
ADAPTER, AIRCRAFT, JACKING POINT, DESIGN AND INSTALLATION OF
|
|
MS33566
|
FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS
|
|
MS33588
|
NUTS, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIRE
|
|
MS33602
|
BOLTS, SELF-RETAINING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY, DESIGN AN
|
|
MS33620
|
CHART, HOSE SELECTION
|
|
MS33639
|
CASES, INSTRUMENT, CLAMP-MOUNTED, AIRCRAFT
|
|
MS33649
|
BOSS, FLUID CONNECTION - INTERNALSTRAIGHT THREAD
|
|
MS33651
|
BOSS AND INSTALLATIONS - AIR CONNECTION
|
|
MS33658
|
FITTING END, HOSE CONNECTION, STANDARD DIMENSIONS FOR
| |
